[scorpionsman]

Engine Oil Viscosity (SAE Grade) — 2.0L, 2.4L
Engine
MOPAR SAE 0W-20 engine oil approved to FCA US
Material Standard MS-6395 such as Pennzoil, Shell Helix
or equivalent is recommended for all operating tempera
tures.
This engine oil improves low temperature starting
and vehicle fuel economy.
The engine oil filler cap also shows the recommended
engine oil viscosity for your engine. For information on
engine oil filler cap location, refer to “Engine Compart
ment”
in this section.
Lubricants which do not have both the engine oil certi
fication
mark and the correct SAE viscosity grade num

---

MOPAR SAE 0W-20

---

Engine Oil Viscosity — 3.6L Engine
MOPAR SAE 5W-20 engine oil approved to FCA US
Material Standard MS-6395 such as Pennzoil, Shell Helix
or equivalent is recommended for all operating temperatures.
This engine oil improves low temperature starting
and vehicle fuel economy.
The engine oil filler cap also shows the recommended
engine oil viscosity for your engine. For information on
engine oil filler cap location, refer to the “Engine Compartment”
illustration in this section.
NOTE: MOPAR SAE 5W-30 engine oil approved to FCA
US Material Standard MS-6395 such as Pennzoil, Shell
Helix or equivalent may be used when SAE 5W-20 engine
oil meeting MS-6395 is not available.
Lubricants which do not have both the

---

MOPAR SAE 5W-20

---

Лейте 0w20 с допуском MS -6395

---

Лейте 0w20 с допуском MS -6395 и все проблемы уйдут! НА КРЫШКЕ заливной горловины масла указано!!!!!! проверено лично!!!!! на двигатель 2,4
на дигатель 3,6 5w20